SRX AWD V6-3.6L (2008)
Windshield Washer Reservoir: Service and Repair
Windshield Washer Solvent Container Replacement
Removal Procedure
1. Open the hood.
2. Remove the washer solvent container cap from the container.
3. Remove the lower air deflector. Refer to Front Air Deflector Replacement (See: Body and Frame/Spoilers, Flaps, and Air Dams/Air Dam/Service
and Repair) .
4. Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement (See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover /
Fascia/Service and Repair/Front Bumper Fascia Replacement) .
5. Remove the passenger side headlamp for LHD or the driver side headlamp for RHD. Refer to Headlamp Replacement (See: Lighting and
Horns/Headlamp/Service and Repair) .
6. Drain the solvent from the washer solvent container.
7. Disconnect the washer hoses from the washer pumps.
8. Disengage the electrical harness retainer clip from the washer solvent container.
9. Disconnect the electrical connectors from the washer pumps and washer solvent level sensor.
10. Remove the fasteners from the washer solvent container.
11. Guide the fill neck down through the radiator support.
12. Remove the washer solvent container from the vehicle.