SRX AWD V8-4.6L VIN A (2004)
![background image](/cadillac/srx_awd/v8-4.6l_vin_a/Page-2760001.png)
Rear Door Weatherstrip: Service and Repair
Weatherstrip Replacement - Rear Door Upper Auxiliary
Weatherstrip Replacement - Rear Door Upper Auxiliary
Removal Procedure
1. Lower the window to the full down position.
2. Remove the rear door stationary window/division channel.
3. Remove the screws from the rear door upper auxiliary weatherstrip.
4. Remove the upper auxiliary weatherstrip.
Installation Procedure
1. Install the rear door upper auxiliary weatherstrip onto the door frame.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws working from the front to the rear.
Tighten the screws working from the front to the rear to 2 N.m (18 lb in).
3. Install the rear door stationary window/division channel.