SRX AWD V8-4.6L VIN A (2004)
6. Remove either the front left or front right sunroof front window track (3).
7. Cut the tie straps securing the electrical harness to the return tubes. Discard the tie straps.
8. Release the return tube (2) from the front sunshade motor/actuator block. Use a flat-bladed tool to release the return tubes.
9. Hold onto the motor block. Gently pry the drive (1) and return tube (2) from the motor actuator block.
10. Carefully remove the drive and return tubes from the motor/actuator compartment.
11. Remove the front sunshade motor/actuator block assembly from the motor compartment.
INSTALLATION PROCEDURE