SRX AWD V8-4.6L VIN A (2004)
7. Engage the power seat switch bezel fasteners in order to secure the bezel to the seat cushion frame.
8. Install the power seat switch knobs.
9. Install the seat cushion.
10. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 7 () driver's seat and SIR Disabling and Enabling Zone 9 () and passenger seat.
Lumbar Switch Replacement
Lumbar Switch Replacement
Removal Procedure
1. Remove the seat track trim cover (1) from the seat.
2. Disconnect the lumbar switch (2) electrical connector.
3. Remove the lumbar switch.
Installation Procedure