SRX AWD V8-4.6L VIN A (2004)
![background image](/cadillac/srx_awd/v8-4.6l_vin_a/Page-668001.png)
Engine Block Heater: Service and Repair
Coolant Heater
KO5
Coolant Heater Replacement (LH2 (KO5))
Removal Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the coolant heater power supply cord from the coolant heater.
3. Complete the following in order to remove the coolant heater from the engine block:
1. Pry outward on the retaining clip.
2. Pull the coolant heater from the engine block.
Installation Procedure