SRX AWD V8-4.6L VIN A (2004)
Fuel Level Sensor: Service and Repair
FUEL LEVEL SENSOR REPLACEMENT - PRIMARY
REMOVAL PROCEDURE
CAUTION: Refer to Gasoline/Gasoline Vapors Caution in Service Precautions.
1. Remove the primary fuel tank module.
2. Disconnect the fuel level sensor electrical connector (1) from the module.
3. Complete the following in order to remove the fuel level sensor (1) from the module assembly:
3.1.
Pull the locking tab (2) away from the sensor (1).
3.2.
Slide the sensor (1) away from the module assembly.
INSTALLATION PROCEDURE