SRX AWD V8-4.6L VIN A (2004)
6. Notice:
Install the TOC to cooling fan shroud bolts.
^
Tighten the bolts to 6.5 Nm (58 inch lbs.).
7. Connect the TOC line to the TOC retainer clip (1).
8. Connect the transmission oil cooler (TOC) lines to the TOC.
^
Tighten the fittings to 20 Nm (15 ft. lbs.).
9. Reposition and reinstall the condenser.
Transmission Fluid Cooler Pipe Replacement - Rear
Transmission Fluid Cooler Pipe Replacement - Rear (w/AWD)
^
Tools Required
-
J 44827 Transmission Cooler Quick Connect
Removal Procedure
1. Remove the engine oil filter.
2. Remove the left hand (LH) intermediate shaft bearing assembly.