SRX AWD V8-4.6L VIN A (2004)
8. Dill out the retainer bracket rivets.
9. Remove the retainer bracket.
10. Remove the TOC lines.
Installation Procedure
1. Install the TOC lines.
2. Install the retainer bracket.
3. Install the retainer bracket to the TOC lines.
4. Rivet the retainer bracket to the TOC lines.
5. Notice:
Install the TOC retainer bracket bolt.
^
Tighten the bolt to 25 Nm (18 ft. lbs.).
6. Install new O-rings to the rear TOC lines.
7. Connect the rear TOC lines to the transmission.
8. Install the rear TOC line to transmission retainer bolt.
^
Tighten the bolt to 25 Nm (18 ft. lbs.).