SRX RWD V6-3.6L (2007)
Notice: Refer to Fastener Notice.
2. Install the two fasteners in order to retain the assist handle to the roof.
Tighten the 2 screws to 2 N.m (18 lb in).
3. Install the headliner.
4. Remove the center pillar garnish trim.
Notice: Refer to Fastener Notice.
2. Install the two fasteners in order to retain the assist handle to the roof.
Tighten the 2 screws to 2 N.m (18 lb in).
3. Install the headliner.
4. Remove the center pillar garnish trim.