SRX RWD V6-3.6L (2007)
Seat Back: Service and Repair
Front Seat Back Frame Replacement
Front Seat Back Frame Replacement
Removal Procedure
Caution: Refer to Restraint System Service Precautions.
1. Remove the front bucket seat.
2. Remove the seat cushion from seat.
3. Remove the push-in retainer (1) from the trim covers.
4. Remove the trim covers.
5. Remove the seat back cover and pad.
6. Remove the front seat belt assembly.
Important: Note the electrical wiring routing during disassembly in order to ensure proper electrical wiring routing during reassembly.
7. Disconnect and remove the remaining electrical connectors are attached to the seat back frame.
8. Remove the bolt retaining the seat back frame to the riser.
9. Remove the bolts (1) retaining the seat back frame to the recliner.
10. Lift up on the seat back frame in order to disengage the seat back from the recliner.