SRX RWD V6-3.6L (2007)
Tighten the seat belt guide screw to 2 N.m (18 lb in).
6. Install the child restraint anchor bezel (1).
7. Install the left seat cushion.
8. Install the head restraint guides.
9. Install the head restraints.
10. Install the seat in the vehicle.
Rear Seat Back Cushion Cover and Pad Replacement - Right Side
Rear Seat Back Cushion Cover and Pad Replacement - Right Side
Removal Procedure
1. Remove the seat from the vehicle.
2. Remove the head restraints.
3. Remove the head restraint guides.
4. Remove the right seat cushion.
5. Remove the seat release latch screw (1).
6. Disconnect the release cables.
7. Remove the latch from the seat.
8. Remove the seat back cover.
Installation Procedure
1. Install the seat back cover on to the seat back.
2. Install the seat release cable to the release latch.