SRX RWD V6-3.6L (2007)
3. Connect the wiring harness to the air duct (1).
4. Install the dash insulator (1).
5. Install the I/P retainer.
Instrument Panel Outer Air Outlet Upper Duct Replacement - Right Side (Right Hand Drive)
Instrument Panel Outer Air Outlet Upper Duct Replacement - Right Side (Right Hand Drive)
Removal Procedure
1. Remove the instrument panel (I/P) retainer.
2. Disconnect the wiring harness from the air duct (1).
3. Remove the screws (1) that retain the air duct (2).
4. Remove the right air duct (2), by releasing the tabs from the module.
Installation Procedure
1. Install the right air duct (2), by pressing down until you hear the tabs engage on the HVAC module.
Notice: Refer to Fastener Notice.
2. Install the right air duct screws (1).