SRX RWD V6-3.6L (2007)
Negative: Service and Repair
Battery Negative Cable Replacement
Battery Negative Cable Replacement (LY7 (LHD))
Removal Procedure
Important:
*
Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
*
Always route the replacement cable the same as the original cable.
1. Disconnect the negative battery cable.
2. Disconnect the instrument panel (I/P) wiring harness electrical connector (1) from the negative battery cable electrical connector (4).
3. Disconnect the I/P wiring harness electrical connector (3) from the battery current sensor (2).