SRX RWD V6-3.6L (2007)
5. Install the power steering gear inlet hose fitting to the power steering pump.
Tighten the fitting to 38 N.m (28 lb in).
6. Install the power steering gear inlet hose quick connect to the fitting.
7. Install the air cleaner assembly front half.
Tighten the screws to 8 N.m (71 lb in).
8. Install the air cleaner inlet duct.
9. Clean any excess fluid from the vehicle.
10. Remove the drain pans from under the vehicle.
11. Install the front air deflector.
12. Install the left front bumper fascia extension.
13. Install the left front tire/wheel assembly.
14. Bleed the power steering system.