SRX RWD V8-4.6L VIN A (2006)
6. Remove the amplifier from the bracket.
INSTALLATION PROCEDURE
1. Install the amplifier to the bracket.
Tighten the fasteners to 9 N.m (80 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
6. Remove the amplifier from the bracket.
INSTALLATION PROCEDURE
1. Install the amplifier to the bracket.
Tighten the fasteners to 9 N.m (80 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.