SRX RWD V8-4.6L VIN A (2006)
1. Reinstall the speaker to the trim panel.
2. Push the speaker into the retaining tabs to secure it to the garnish molding.
3. Connect the electrical connector (1).
4. Install the windshield garnish molding (2) to the vehicle.
Speaker Replacement - Rear Door
SPEAKER REPLACEMENT - REAR DOOR
REMOVAL PROCEDURE
1. Remove the door trim panel.
2. Disconnect the electrical connector (1).
3. Remove the screws (3) securing the speaker (2) to the door frame.
4. Remove the speaker from the door.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the speaker onto the door frame.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the screws (3) securing the speaker (2) to the door frame.
Tighten the screws to 2 N.m (18 lb in).
4. Install the door trim panel.
Speaker Replacement - Rear
SPEAKER REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Remove the body side trim panel.