SRX RWD V8-4.6L VIN A (2006)
4. Using J 25070 if necessary, heat the mounting surface to approximately 27-41°C (80-105°F).
5. Ensure that the temperature of the emblem/nameplate is approximately 29-32°C (85-90°F).
Important: Do not touch the adhesive backing of the emblem/nameplate.
6. Remove the protective liner from the back of the emblem/nameplate.
7. Position the emblem/nameplate to the location marks and press the emblem/nameplate to the mounting surface.
8. Apply equal pressure along the emblem/nameplate to uniformly bond the item to the mounting surface.
9. Inspect the emblem/nameplate for bonding. Hand roll loose ends.
10. Remove the tape from the mounting surface.