SRX RWD V8-4.6L VIN A (2006)
1. Place the carpet (1) into the vehicle.
2. Ensure the electrical connectors are exposed above the carpeting.
3. Secure the rear carpet hook and latch material to the intermediate carpet in four places.
4. Press the carpet to the floorpan in order to remove any distortion from the carpet.
5. Install the body side trim panels.
6. Install the rear sill plate.
7. Install the rear carpet retainers.
8. Install the rear seat no. 2.
9. Install the rear seat no. 1.
Carpet Retainer Replacement - Front
Carpet Retainer Replacement - Front
Tools Required
J 38778 Door Trim Pad Clip Remover
Removal Procedure
