SRX RWD V8-4.6L VIN A (2006)
4. Install the sunroof/sunshade assembly screws (2).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the 6 screws to 5 N.m (44 lb in).
5. Pull the sunshade material outward. Install the sunshade screws (1) into the sunshade channel (2).
6. Use downward thumb (1) pressure to press on the retainer (2) until the retainer locks over the sunshade cable barrel (4).
7. Install the headliner.