SRX RWD V8-4.6L VIN A (2006)
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screw to 2 N.m (18 lb in)
9. Install the front sunshade motor/actuator (2).
10. Install the center window panel.
11. Install the front window panel.
12. Perform the front sunshade initialization procedure. Refer to Sunroof Front Window/Sunshade Initialization Process.
Sunroof Sunshade Cable Assembly Replacement (Rear)
SUNROOF SUNSHADE CABLE ASSEMBLY REPLACEMENT (REAR)
REMOVAL PROCEDURE
1. Open the rear sunshade.
2. Remove the headliner.
3. Remove the center and rear vent window.
4. Remove the rear sunshade motor/actuator (6).
5. Remove the rear sunshade.
6. Mark the position of the rear track to frame for installation.
7. Remove the screws to the rear track assembly.
