SRX RWD V8-4.6L VIN A (2006)
1. Position the drive and return tubes (2) to the motor block (3).
2. Use a standard pair of pliers (2) to carefully secure the return tube (1) to the motor block (3).
3. Position the vent window motor/actuator block assembly to the motor compartment.
4. Loosely install 2 motor/actuator screws into the motor/actuator block in order to hold the block into position until the rear track (3) rear drive tube
block (2) is installed.
5. Install either the rear left or rear right sunroof rear window track (3).