SRX RWD V8-4.6L VIN A (2006)
8. Disengage the front track rear extension (2) from the sunshade and window drive tubes (4).
9. Lower the track into the passenger compartment.
10. Carefully pull the sunroof window cable assembly (1) from the front track (2).
11. Remove the cable assembly.
INSTALLATION PROCEDURE
1. Position the bullet end of the cable (4) into the front window track (2).
2. Carefully push the cable assembly (4) into the track channel (1) until the bullet end of the cable reaches past the back side of the track.
