SRX RWD V8-4.6L VIN A (2006)
9. Measure the tracks side-to-side to ensure that both tracks are parallel.
10. Secure the track to drive tube retainers.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 5 N.m (44 lb in).
11. Install the rear sunshade assembly.
12. Install the rear sunroof vent window.
13. Install the center window panel (2).
14. Perform the sunroof rear vent window/sunshade initialization procedure. Refer to Sunroof Rear Window Initialization Process.
