cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Sunroof Front Window Rear Track Assembly Replacement|Page 15800 > < Sunroof Front Window Rear Track Assembly Replacement|Page 15798
Page 3
background image

1. Position the retainer (2) to the drive tube (4) and the track (3).
2. Secure the upper half of the retainer to the lower half of the retainer.
3. Measure the tracks side to side to ensure that the tracks are parallel.

4. Install the rear track screws.

NOTE:  Refer to Fastener Notice in Service Precautions.

Tighten the screws to 5 N.m (44 lb in).

5. Install the rear sunshade assembly.
6. Install the headliner.
7. Install the center and rear vent windows.
8. Perform the rear vent window sunshade initialization procedure. Refer to Sunroof Rear Window Initialization Process.

Sunroof Window Cable Assembly Replacement (Front)

SUNROOF WINDOW CABLE ASSEMBLY REPLACEMENT (FRONT)

REMOVAL PROCEDURE

Sunroof Front Window Rear Track Assembly Replacement|Page 15800 > < Sunroof Front Window Rear Track Assembly Replacement|Page 15798