SRX RWD V8-4.6L VIN A (2006)
Seat Cushion: Removal and Replacement
Seat Cushion Cover and Pad Replacement - Rear No.1 - Left
Seat Cushion Cover and Pad Replacement - Rear No.1 - Left
Removal Procedure
1. Remove the seat from the vehicle.
2. Remove the left seat cushion.
3. Remove the suspension spring from the bottom of the seat.
4. Disconnect the J channel retainers (1) from around the seat.
5. Remove the seat cushion cover.
Installation Procedure
1. Install the seat cushion cover on to the seat.
2. Connect all J channel retainers (1).
3. Install the suspension spring from the bottom of the seat.
4. Install the left seat cushion.
5. Install the seat in the vehicle.
Seat Cushion Cover and Pad Replacement - Rear No.1 - Right
Seat Cushion Cover and Pad Replacement - Rear No.1 - Right