SRX RWD V8-4.6L VIN A (2006)
3. Remove the brake pads (2) from the brake caliper bracket (3).
4. Remove the brake pad retainers (1) from the brake caliper bracket (3).
5. Remove the brake caliper guide pins (3).
6. Remove the brake caliper pin boots (2) from the brake caliper mounting bracket (1).
7. Remove the brake caliper bracket mounting bolts (2).
8. Remove the brake caliper bracket (1) from the knuckle.
9. Inspect the brake caliper bracket (1). Refer to Disc Brake Hardware Replacement - Front.
10. Replace the brake caliper bracket if cracked or damaged.
Installation Procedure
1. Install the brake caliper bracket (1) to the knuckle.
2. Important: If reusing the caliper bracket bolts the threads of the caliper bracket bolts and the threads of the knuckle mounting holes must be free
of residue and debris prior to application of threadlocker in order to ensure proper adhesion and fastener retention.