SRX RWD V8-4.6L VIN A (2006)
Installation Procedure
1. Install the motor to the shroud.
2. Install the cooling fan motor retaining screws (1).
Tighten the screws to 5 Nm (44 inch lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the fan blade to the motor shaft.
4. Rotate the fan until the fan drops onto the shaft.
5. Install the fan blade retaining nut (1) to the motor.
Tighten the nut to 7 Nm (62 inch lbs.).