SRX RWD V8-4.6L VIN A (2006)
Rocker Arm Assembly: Service and Repair
Valve Rocker Arm Replacement - Right
Valve Rocker Arm Replacement - Right
Removal Procedure
1. Remove the right camshafts.
2. Remove the camshaft followers from the right cylinder head.
Important: Ensure each camshaft follower remains matched to the original stationary hydraulic lash adjuster (SHLAs) and original location the
components were assembled in.
3. Clean and inspect the rocker arms. Refer to Valve Rocker Arms Cleaning and Inspection.
Installation Procedure
1. Apply a liberal amount of lubricant GM P/N 12345001 or equivalent to the roller pivot pocket (2) and valve slot areas (1) of the camshaft
followers.