SRX RWD V8-4.6L VIN A (2006)
9. Ensure that the rear portion of the rail support is resting on the reinforced section of the fender flange.
10. Assemble a J28467-16 tube assembly (1) to each end of the J28467-518, in line with the lift bracket and support bracket, using the J28467-1 cross
brackets.
11. Install the J28467-4A front support assemblies to the J28467-16 using the J28467-9 quick release pins. Ensure that the J28467-16 are as level as
possible by selecting the appropriate hole for the quick release pins.