SRX RWD V8-4.6L VIN A (2006)
3. Release the ratchet lever (2).
2. Slowly release the pressure on the shoe (1), until the ratchet lever (2) moves to the first detent and a click is heard and felt.
3. Collapse the tensioner shoe (1) and hold.
4. Insert a pin through the hole in the release lever in order to lock the tensioner shoe in the collapsed position.
5. Install the primary camshaft drive chain tensioner and retaining bolts.
Tighten the primary camshaft drive chain tensioner bolts to 25 Nm (18 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
Important: Ensure the tensioner release lever is facing outward.
6. Remove the pin holding the tensioner to tighten any slack in the timing chain.
7. Ensure the primary timing marks (1) are aligned vertically.
8. Install the engine oil pump.
