SRX RWD V8-4.6L VIN A (2006)
1. Coat the sensor threads with sealer GM P/N 1050805, or equivalent.
2. Install the ECT sensor.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the ECT sensor to 20 N.m (15 lb ft).
3. Connect the ECT sensor harness connector.
4. Install the fuel injector sight shield.
5. Refill the coolant system. Refer to Draining and Filling Cooling System (Static Fill) Draining and Filling Cooling System (GE 47716) in Cooling
System. See: Engine, Cooling and Exhaust/Cooling System/Service and Repair