SRX RWD V8-4.6L VIN A (2006)
1. Install the ignition coil.
IMPORTANT: Ensure that the spark plug seals are in place when installing the ignition coil.
2. Install the ignition coil retaining bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the ignition coil retaining bolt to 10 N.m (89 lb in).
3. Reconnect the ignition coil electrical connector.
4. Install the ignition coil cover to the cam cover.
5. Install the fuel injector sight shield.