SRX RWD V8-4.6L VIN A (2006)
9. Important: Remove the frame bolts from the side that the coil spring is being replaced on.
Remove the frame to body side mounting bolts and washers.
10. Important: Lower the frame far enough to remove the coil spring without going past the guide pins.
Lower the side of the frame.
11. Remove the coil spring from the vehicle.
Installation Procedure
1. Install the coil spring to the vehicle.
2. Raise the frame.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the frame to body mounting bolts and washers.