SRX RWD V8-4.6L VIN A (2006)
Seals and Gaskets: Service and Repair
Drive Flange and Seal Replacement
Drive Flange and Seal Replacement
Tools Required
^
J 6125-1B Slide Hammer
^
J 23129 Universal Seal Remover
^
J 29873 Injector Nozzle Socket 30 mm
^
J 44765 Seal Installer
^
J 45012 Holding Fixture
^
J 45019 Universal Puller
Removal Procedure
1. Raise and support the vehicle.
2. Remove the transmission manual shift shaft nut.
3. Disconnect the shift linkage from the transmission.
4. Place the transmission in neutral by rotating the transmission shift shaft clockwise 2 clicks.
5. Remove the exhaust system.
6. Disconnect the propeller shaft coupler (1) from the transmission flange.
7. Push the front propeller shaft toward the rear of the vehicle in order to release the propeller shaft coupler (1) from the transmission drive flange.
8. Secure the front propeller shaft (1) to the shift control lever (3) with a piece of mechanics wire (2).
