SRX RWD V8-4.6L VIN A (2006)
Fluid - Differential: Service and Repair
Front Drive Axle
Lubricant Replacement - Front Drive Axle
Draining Procedure
1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Clean any dirt from around the differential drain plug.
3. Position a drain pan under drain plug.
4. Remove the drain plug from the differential and drain the fluid.
Filling Procedure
1. Notice:
Refer to Fastener Notice in Service Precautions.
Install the drain plug to the differential.
^
Tighten the differential drain plug to 39 Nm (29 ft. lbs.).