cadillac Workshop Repair Guides

Cadillac Workshop Service and Repair Manuals

Camshaft Position (CMP) Actuator Housing Replacement - Left|Page 2842 > < Camshaft Position (CMP) Actuator Housing Replacement - Left|Page 2840
Page 40
background image

3. Notice:  Refer to Torque Reaction Against Timing Drive Chain Notice in Service Precautions.

Notice:  Refer to Fastener Notice in Service Precautions.

Use an open end wrench on the hex cast into the left intake camshaft to prevent the camshaft from rotating when tightening the camshaft oil control
valve.
Tighten the camshaft oil control valve to 120 Nm (89 ft. lbs.).

4. Remove the EN 46327 (1).

Camshaft Position (CMP) Actuator Housing Replacement - Left|Page 2842 > < Camshaft Position (CMP) Actuator Housing Replacement - Left|Page 2840