STS V8-4.6L VIN A (2005)
3. Remove the rear seat.
4. Locate and remove the AIR BAG (IGN) fuse in the right rear fuse center (1) and the AIR BAG (BATT) fuse from the left rear fuse center (2).
IMPORTANT: This sensing and diagnostic module (SDM) has 2 fused power inputs. To ensure there is no unwanted SIR deployment, personal
injury, or unnecessary SIR system repairs, remove both the AIR BAG (IGN) fuse in the right fuse center and the AIR BAG (BATT) fuse from the left
rear fuse center. With both AIR BAG fuses removed and the ignition switch in the ON position, the AIR BAG warning indicator illuminates. This is
normal operation, and does not indicate an SIR system malfunction.
5. Remove both connector position assurance (CPA) from the RF/passenger side impact module and seat belt pretensioner yellow connector (1)
which is located under the front of passenger seat.
6. Disconnect the RF side impact module and pretensioner yellow connector (1) from the vehicle harness yellow connector.
ENABLING PROCEDURE
1. Place the ignition in the OFF position.
2. Connect the RF side impact module and pretensioner yellow connector (1) to the vehicle harness yellow connector.
3. Install both CPA locks to the RF side impact module and pretensioner yellow connector (1).
