STS AWD V8-4.6L VIN A (2006)
Battery Current Sensor: Service and Repair
BATTERY CURRENT SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Disconnect the instrument panel (I/P) harness electrical connector (1) from the battery current sensor.
2. Remove the negative battery cable.
3. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
4. Squeeze the negative battery cable branches together.
5. Slide the battery current sensor (1) off of the negative battery cable.
IMPORTANT: Note the position of the battery current sensor prior to removal.
INSTALLATION PROCEDURE