STS AWD V8-4.6L VIN A (2006)
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the transmission to support mounting bolts.
Tighten the bolts to 60 Nm (44 ft. lbs.).
3. Install the transmission mount to body mounting bolts.
Tighten the bolts to 60 Nm (44 ft. lbs.).
4. Install the transmission vent hose to the retainers on the mount assembly.
5. Remove the transmission jack.
6. Install the exhaust system.
7. Lower the vehicle.
