STS RWD V6-3.6L (2007)
Seat Belt Buckle: Service and Repair
Rear Seat Belt Buckle Replacement
Removal Procedure
Caution: Refer to Restraint System Service Precautions in Service Precautions.
1. Remove the rear seat cushion.
2. Remove the seat belt buckle fasteners (1) and remove the seat belt buckles (2).
3. Disconnect the wiring connection to the left and right seat belt buckles.
4. Remove the rear seat belt buckles (2) from the floor pan.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the rear seat belt buckles (2) to the floor pan.
Tighten the seat belt buckle fasteners to 30 N.m (22 lb ft).
2. Connect the left and right rear seat belt buckle electrical connectors.
3. Install the rear seat cushion.