STS RWD V8-4.6L (2007)
1. Install the yaw rate sensor/lateral and longitudinal accelerometer (1).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the 2 yaw rate sensor/lateral and longitudinal accelerometer nuts (2).
Tighten the yaw rate sensor/lateral and longitudinal accelerometer mounting nuts to 9 N.m (80 lb in).
3. Connect the yaw rate sensor/lateral and longitudinal accelerometer electrical connector (2) to the yaw rate sensor/lateral and longitudinal
accelerometer (1).
4. Perform the System Check-Vehicle. Go to Diagnostic System Check - Vehicle. See: Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnostic System Check - Vehicle