STS RWD V8-4.6L (2007)
Important: Twisting or tilting of the transmission control module electrical connector while connecting may result in bent or misaligned
electrical terminal pins.
3. Carefully connect the transmission control module electrical connector (1) to the transmission control module.
4. Lock the transmission control module electrical connector securely to the transmission control module by pushing the retainer (2) toward the
electrical connector (1) until fully seated.
5. The transmission control module must be programmed with the proper software/calibrations. Refer to Control Module References.
Important: It is recommended that transmission adaptive pressure (TAP) information be reset.
Resetting the TAP values using a scan tool will erase all learned values in all cells. As a result, The ECM, PCM or TCM will need to
relearn TAP values. Transmission performance may be affected as new TAP values are learned.
6. Reset the TAP values. Refer to Transmission Adaptive Functions (5L40-E/5L50-E) Transmission Adaptive Functions (5L50-E).
7. Refer to Control Module References for programming and setup information.
