STS RWD V8-4.6L (2007)
1. Position the locator pins on the window into the upper sheet metal slots in order to hold the stationary window in place in a cross-car position.
2. Install the stationary window into the opening.
3. Install the windshield side reveal moldings.
4. Install the rearview mirror.
5. Install the interior windshield garnish moldings.
6. Install the air inlet grille.
7. Install the windshield wipers arms.
8. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
9. Close the hood.
Windshield Side Reveal Molding Replacement
Windshield Side Reveal Molding Replacement
Removal Procedure