XLR V8-4.6L VIN A (2006)
Front Bumper Reinforcement: Description and Operation
Impact Bar Description - Front Bumper
The front impact bar (bumper beam) is made of Ultra-High Strength steel. The impact bar is MIG welded to the mild steel frame rails. The impact bar
can be repaired if damage excludes kinks, or damage which would require the use of heat to straighten. Replacing the bumper bar requires special
procedures to access the welds attaching the bumper bar to the frame rails. This procedure was developed to facilitate this repair while maintaining the
integrity of the bumper system. The front bumper impact bar as supplied for service includes riv-nuts pre-installed for component mounting of the SIR
sensors, fog-lamps, and energy absorber. Replacement riv-nuts are available from Kent Moore Tools (Riv-Nut Kit P/N J42151-8msn), if needed.