XLR V8-4.6L VIN A (2006)
Installation Procedure
1. Install the hood latch (2) to the latch support (3).
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolts (1) attaching the latch (2) to the latch support (3).
Tighten the bolts to 9 N.m (80 lb in).
3. Connect the hood release cable (1) to the latch.
4. Connect the secondary latch cable (2) to the latch.
5. Slowly lower the hood and check the latch for the proper alignment.
6. Adjust the latch as necessary.
7. Install the front section of the air cleaner assembly.
8. Close the hood.