XLR V8-4.6L VIN A (2006)
Seal the area of the rear compartment lid inner and outer panels at the outer most vertical seam (between arrows either side). The seam is on the inside
of the rear compartment lid. Refer to the illustration above. Use Kent Seam Sealer, P/N P10200, to seal the seam for best appearance.
Important:
Inspect the rear tub drains to ensure that they are clear of any obstructions. Inspect to be sure that there is no loose material in the tub that could
cover the drain on the inside of the tub. If the drain has a duck bill type drain at the end, use scissors to make one cut in the bottom opening so that if
viewed from the bottom it will have an "X" instead of a slit in the opening.
Parts Information
Kent Products can be purchased by calling 1-800-654-6333 (in Canada, 1-800-563-1717). 1-800-654-6333 (in Canada, 1-800-563-1717).
Disclaimer
