XLR V8-4.6L VIN A (2006)
Important: Fuel system components lie under the floor of the rear compartment panel. When drilling the access hole restrict the drilling
depth to 12 mm (1/2 in) (2).
4. Drill an access hole with a 50 mm (2 in) hole saw (1).
Important: Using air tools to remove the nut may damage the bolt through tube.
5. Remove the nut (3) using hand tools.
6. Remove the spring clip (1).
7. Remove the bolt (2).
Installation Procedure
Important: Verify that you have selected a bolt of the proper length.
1. Install the bolt (2).