XLR V8-4.6L VIN A (2006)
12. Remove the windshield side garnish moldings.
13. Remove the right and the left I/P end caps. Pull outward to disengage the caps from the I/P.
14. Remove the I/P trim pad.
15. Remove the I/P cluster (IPC).
16. Remove the speakers from the I/P.
17. Remove the sensing and diagnostic module (SDM) and the YAW sensors from the I/P carrier.
18. Remove the global positioning system (GPS) antenna from the I/P carrier.
19. Remove the remote control door lock receiver.
20. Remove the steering wheel from the steering column.
21. Remove the retaining bolts and nuts from the I/P carrier.
22. Remove the retaining bolts from the lower beam behind the I/P compartment door.