XLR V8-4.6L VIN A (2006)
4. Install the retaining screw at the bottom of the trim panel.
Tighten the screw to 1.9 N.m (17 lb in).
5. Install the knee bolster trim panel.
Instrument Panel (I/P) Trim Panel Replacement - Right
Instrument Panel (I/P) Trim Panel Replacement - Right
Removal Procedure
1. Remove the knee bolster trim panel.
2. Remove the retaining screw at the bottom of the trim panel.
3. Pull the right trim panel outward to disengage the retaining clips from the I/P carrier.
4. Disconnect the electrical connectors.