XLR V8-4.6L VIN A (2006)
18. While pushing up on the link, remove the travel limit screw (1) from the link.
19. Support the link to prevent the link from swinging down when you remove the strut actuator.
20. Use a flat-bladed tool to lift up on the retainer clip (2) on the link side of the strut actuator.
Notice: Apply pressure only at the end of the strut actuator that you are removing or attaching. DO NOT apply pressure to the middle of the rod
because damage or bending will result.
21. Remove the strut actuator (2) from the ball joint (1) on the link.
22. Remove the front link bolts (1).
